![]() I used the 32-bit x86 to create an installer/bootable USB keychain drive, using UNetbootin. Įxternal USB drive - Western Digital, 1TB. This 16 GB PATA SSD has a functional installation of LXLE on it. Also, the Dell's internal 16 GB PATA SSD has been disabled in Firmware so the Dell will not boot from it nor should it recognize it during startup. Unit is set to USB BIOS Legacy Support from the firmware, so it may boot from USB. The server: 32-bit Dell Inspiron Mini 9 (also called the Inspiron 910), Diamondville Intel Atom N270 (1.6 GHz/533Mhz FSB/512K cache), 2 GB of RAM. I've done some test installations and it's performed incredibly well, with one exception - I cannot start up to the desired drive without using the install media attached, and restarting. Set to enable or disable UPnP (Universal Plug and Play).I've been researching Daphile for a while now, and I believe it's exactly what I've been looking for. You can enter the proxy server address and port number on the next screen. Specify the maximum size of data packets (in bytes) that can be sent in one transmission. Īutomatically acquire the DNS server address.Ĭonfigure the MTU value used when transmitting data. You can enter your user ID and password on the next screen. You can enter values for the IP address, subnet mask, default router and primary and secondary DNS on the next screen. You can enter the DHCP server host name on the next screen. Use the IP address allocated by the DHCP server. Set the method for obtaining an IP address when connecting to the Internet. Manually adjust the Ethernet data transfer rate and operation method. Set the Ethernet data transfer rate and operation method. For details, refer to the information supplied by the public WLAN service provider. Set authentication information when using public WLAN services.Įnter your user ID and password on the next screen. These settings are available only on PS3™ systems sold in Korea and are available only on PS3™ systems that are equipped with the wireless LAN feature. The encryption key is displayed as a series of asterisks. ![]() The encryption key can be entered on the next screen. This setting is available only on PS3™ systems that are equipped with the wireless LAN feature. Set an encryption key for an access point. Select this setting when using an access point that supports automatic setup. This setting is available only in regions where PS3™ systems that support this feature are sold. Use the automatic setting feature of the access point. Select this setting when you know the SSID. Specify the access point by entering its SSID manually using a keyboard. The system will detect nearby access points and display information on the SSID and security settings. Select this setting when you do not know the SSID of the access point. ![]() Make a wireless connection via a wireless LAN Make a wired connection using an Ethernet cable Set the method for connecting to the Internet. The items displayed vary depending on the settings you have selected. Select when a confirmation screen is displayed stating that you will be disconnected from the Internet.Īdjust each item as necessary for the network environment in use. Adjust each item as necessary for your particular network environment. If you are unable to connect to the Internet with basic settings, change your settings as necessary.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |